9. NBDP FILE OPERATIONS
9-3
9.3.1 How to format floppy disks or SD cards
Before you save a file to a floppy disk or an SD card, the disk or the card must be for-
matted. Format the disk or the card as below.
1. Press the function key F1 to open the [File] menu.
2. Insert a new floppy disk or SD card in the drive.
3. Press the 0 key to select [Floppy Disk Format] or [SD Card Format].
4. Press the ↑ key to select [Yes] then press the Enter key. The screen shows for-
matting progress as below. After formatting has been completed, control is re-
turned to the standby screen.
9.3.2 How to save a file
1. Press the function key F1 to open the [File] menu.
2. Press the 3 key to select [Close].
The [Close Text] window appears.
3. With [Yes] selected, press the Enter
key.
4. Enter the file name, using up to eight
characters. You can use any alphabet or numeric on the keyboard. You can not
use the symbols shown below. You can add an extension at the end of the file
name, for example, .TXT, to distinguish text files from macro files. For macro files,
add the extension ".MCR".
5. Press the Enter key.
9.4 How to Edit Files
9.4.1 How to cut and paste text
You can delete, move and copy text by using the [Cut],
[Copy] and [Paste] functions in the [Edit] menu.
SD Card Format
9%
[Floppy Disk Format]
for IB-583
Save file ?
( UNTITLED1 )
Close Text
Yes
No
| : " > < ;
1: Undo
2: Cut
3: Copy
4: Paste
5: Select All
6: Search
7: Replace
8: Goto Top
9: Goto Bottom
0: Goto Line
A: Change Text
Edit
To Next Page
Loading...
Need help?
General
