FOREWORD
xv
Software used in this product
This equipment uses the following open source software.
• Ubiquitous QuickBoot Copyright
©
2015 Ubiquitous Corp. All rights reserved.
• This product includes software to be licensed under the GNU General Public License (GPL) ver-
sion 2.0, GNU Lesser General Public Software License (LGPL) version 2.0, Apache, BSD and
others. The program(s) is/are free software(s), and you can copy it and/or redistribute it and/or
modify it under the terms of the GPL version 2.0 or LGPL version 2.0 as published by the Free
Software Foundation. Please access to the following URL if you need source codes: https://
www.furuno.co.jp/contact/cnt_oss01.html.
Program no.
1950152-07.** (** denotes minor modifications.)
CE declaration
With regards to CE declarations, please refer to our website (www.furuno.com), for further infor-
mation about RoHS conformity declarations.
• Points (waypoints) and routes are transferred and shared between NavNet TZtouch2 units via
Ethernet.
• Large memory stores 30,000 track points, 30,000 points, and 200 routes (500 points per route),
200 boundaries, 1000 photos and 1000 catches.
• Able to write and read data (points, routes, tracks, etc.).
• Built in GPS receiver and antenna (TZTL12F/TZTL15F).
• Built in fish finder.
• AIS function (requires connection of AIS transponder) receives AIS data from AIS equipped ves-
sels, shore stations and navigational aids and displays relevant data.
• ACCU-FISH
™
provides at-a-glance estimation of length and depth of individual fish.
• Bottom discrimination display helps identify probable bottom composition with graphics and colors.
• RezBoost
™
raises echo resolution to see fish echoes clearly. (Requires RezBoost
™
capable trans-
ducer. Not available when the transducer is installed with the inside hull installation method.)
• Dual-range radar display for watch on short and long distances at the same time.
• DSC (Digital Selective Calling) message information feature provides the MMSI no. and position of
vessels that have transmitted a DSC message to you. (Requires DSC capable radiotelephone.)
• Control audio of FUSION-Link
™
equipment.
• HDMI output (type A receptacle).
• Monitoring of the inside/outside of your ship via analog camera (FLIR
™
or AXIS
™
).
• Monitoring around the vessel with pan-tilt-zoom capable (PTZ) cameras (FLIR
™
or AXIS
™
).
• Control of all software applications from an external monitor, connected via the HDMI IN and USB
for HDMI OUT ports (TZT2BB only).
• View separate screens on connected dual monitors (TZT2BB only.)
To Next Page
Loading...
Need help?
General