To Next Page

To Previous Page

2. PLOTTER

2-11

[Display Light Description]: Show or hide the light descriptions.

[Display Light Sectors]: Show or hide light sectors for fixed beacons.

[Display Routes]: Show or hide routes.

[Display Routes Bearings]: Show or hide route bearings.

[Display Soundings]: Show or hide depth soundings.

[Display Soundings in Red]: Spot soundings whose depths are lower than the value

selected on the [Shallower than...] menu are shown in red.

[Shallower than ...]: Select the value for the [Display Soundings in Red] menu (setting

range: 0.0, 3.3, 6.6, 9.8, 13.1, 16.4, 19.7, 23.0, 26.2, 29.50, 32.8, 49.2, 65.6, 98.4 ft).

[Obst. Depth Below Safety]: Show or hide obstruction depths under the safety

depths.

[Display Seabed]: Show or hide seabed composition indication, for example, mud,

sand, rock.

[Cautionary Areas]: Show or hide the cautionary areas that appear on the chart.

[Reset Default Settings]: Select this menu item to restore default settings for the

[Vector Chart] menu.

2.9.2 Control visibility of cartographic objects in S-52 charts

The [Settings] - [S-52 Display] menu controls the visibility of S-52 cartographic objects,

for example, lights and fog signals.

[S-52 Vector Chart Display Mode]: Set the level of information to show on the chart.

The selections are [Custom], [Base], [Standard], [Other], and [Fishing]. The chart fea-

tures are turned on or off according to setting.

Furuno TZT2BB User Manual

Other manuals for Furuno TZT2BB