6. RADAR
6-9
6.8.5 How to measure the range with the VRM
The VRM is a dashed ring so that you can identify the VRM from the fixed range rings.
Method 1: From the data area
Open the data area. Tap the VRM indication in the [EBL/VRM] box. Drag the VRM or
slider to set the VRM. Tap [End VRM] to anchor the VRM and finish. The range to the
VRM appears to the left of the slider bar and in the [EBL/VRM] data box.
To clear the VRM, open the pop-up menu, the tap [EBL] and [Clear].
Tap
here.
OR
Drag slider
(or tap bar or +, - icons)
Drag slider
(or tap bar or +, - icons)
Tap [End VRM]
to anchor VRM
and exit.
Drag
VRM
EBL/VRM
box
Drag
VRM
Range to
object
Range to
object
RADAR
DATA
ROUTE
VRM
VRM
VRM
VRM
To Next Page
Loading...
Need help?
General