190-02692-00 Rev. A
Garmin G100 Pilot’s Guide for the Piper PA-32 Saratoga 47
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Changing Vspeeds and turning Vspeed bugs on/off:
1) Press the
TMR/REF
Softkey.
2) Turn the
large FMS
Knob to highlight the field of the desired Vspeed to be changed.
3) Turn the small FMS Knob to enter the desired value. When a speed has been changed from a default value, an
asterisk appears next to the speed.
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF Field.
5) Turn the
small FMS
Knob clockwise to ‘ON’ or counterclockwise to ‘OFF’.
6) To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
Timer/References Page MenuTimer/References Window
Figure 2-4 Timer/References Window and Menu
Turning all Vspeed bugs on/off:
1) Press the
TMR/REF
Softkey.
2) Press the
MENU
Key.
3) To activate all Vspeed bugs, press the ENT Key with ‘All References On’ highlighted.
4) To remove all Vspeed bugs, turn the FMS Knob to highlight ‘All References Off’ and press the
ENT
Key.
Restoring all Vspeed defaults:
1) Press the
TMR/REF
Softkey.
2) Press the
MENU
Key.
3) Turn the
FMS
Knob to highlight ‘Restore Defaults’ and press the
ENT
Key.