Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A204
FLIGHT MANAGEMENT
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
FLIGHT PLAN WAYPOINT AND AIRWAY MODIFICATIONS
All flight plans can be edited at any time. Waypoints and airways can be added, modified, or removed from
any flight plan. Edits made to an active flight plan affect navigation as soon as they are entered. Modifications
to flight planned departures, arrivals, approaches, and missed approaches are discussed later in the Procedures
portion of Flight Management.
FLIGHT PLAN WAYPOINTS
Flight plans are limited to 100 waypoints (including waypoints within airways and procedures). If the
number of waypoints in the flight plan exceeds 100, the message “Flight plan is full. Remove unnecessary
waypoints.” appears and the new waypoint(s) are not added to the flight plan.
aDDinG WayPoints
To add a waypoint, choose the flight plan, select the desired point of insertion, enter the waypoint,
and the waypoint will be added prior to the selected waypoint. Either the WAYPOINT INFORMATION
Window or Waypoint Submenu can be used when entering the waypoint.
NOTE: If the identifier entered in the WAYPOINT INFORMATION Window has duplicates, a DUPLICATE
WAYPOINTS Window is displayed. Use the FMS Knob to select the correct waypoint.
Figure 5-54 FPL – STORED FLIGHT PLAN Page
Stored Flight Plan Selected
– Memory Slot
– Comment
– Procedure Identifier
– Waypoint Identifier
– Airway Identifier
– Desired Track to Waypoint
– Distance to Waypoint
– Waypoint Altitude Constraint
Softkeys