GE LOGIQ E8 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
7 - 44 Section 7-5 - Gathering Troubleshooting Data (R4.2.5x and later)
7-5-5 Capturing network logs to use for troubleshooting
Use the Network Capture utility to capture network logs. Once the logs are captured and extracted from
the system, use Microsoft Message Analyzer to convert the output, and then Wireshark (or some other
network sniffer) to analyze it.
To troubleshoot network capture logs:
1.) On the LOGIQ™ S8, run the Network Capture utility to generate .etl and .cab files for analysis. For
more information, see "Network Capture" on page 7-61.
2.) Locate the .etl file at D:\Service.
3.) Transfer these files to a laptop.
4.) On the laptop, download Microsoft Message Analyzer (if not already done).
5.) In Microsoft Message Analyzer, open the .etl file.
If the DICOM connection is encrypted, you will not be able to see the contents of the packets.
Microsoft Message Analyzer does not have a plug-in to decode DICOM packets.

GE LOGIQ E8 Specifications

General

Brand	GE
Model	LOGIQ E8
Category	Medical Equipment
Language	English