GE LOGIQ E8 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 7-7 - Troubleshooting Trees, Instructions and Tech Tips 7 - 69
7-7-3 System does not boot up
Figure 7-62 System does not Power On / Boot Up
Is Standby Switch
illuminated ?
System doesn’t boot
Is Standby Switch
blue ?
Press Standby Switch till it
changes to green
System starts booting
Check cables between
Console and Monitor
Press Standby Switch for
approximately 5 sec. until
system is down.
Is there any picture on
the monitor ?
Is there any picture on
the monitor ?
Is there any picture on
the touch screen ?
Other error.
Please contact the
service engineer
Verify that
-Power Cord is connected to Mains
-Power Switch is turned on
(on the backside of the system)
Shut off the power switch
Wait for 10 sec.
Shut on the power switch again

GE LOGIQ E8 Specifications

General

Brand	GE
Model	LOGIQ E8
Category	Medical Equipment
Language	English