GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 3-3 - Receiving and unpacking the equipment 3 - 7
3-3-2-4 The Tilt & Shock indicators (if applied)
NOTE: Tilt and Shock Indicators are removed in later product shipments.
3-3-2-4-1 Overview
Improper handling during transportation may harm the equipment inside the package even if the
package itself is undamaged.
To make it easier to detect if the handling during transportation has been improper, a set of Tilt & Shock
indicators have been attached to the transportation box.
3-3-2-4-2 Position of the Tilt & Shock indicators
Inspect the Drop and Tilt Indicator for evidence of accidental shock or tilting during transit (damage
incident, as illustrated in the figure below.
Figure 3-1 Tilt & Shock indicators
NOTE: Before cutting the straps, check the Shock and Tilt Tags to make sure they have not been triggered.
If damaged, report it to the carrier. If not, then cut the straps around the crate.
To Next Page
Loading...
Need help?
General
