GE LOGIQ Totus User Manual

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
4 - 10 Section 4-2 - General Procedures
4-2-4 Power shut down
When you switch OFF the LOGIQ Totus, the Ultrasound system performs an automatic shutdown
sequence.
1.) Press once on the ON/OFF button on the operator panel to display the SYSTEM - EXIT menu.
2.) Select Shutdown to shutdown the system..
4-2-5 Complete power down
1.) Press once on the ON/OFF button on the operator panel to display the SYSTEM - EXIT menu
2.) Select Shutdown to do a complete power down of the LOGIQ Totus.
The back end will first turn off the LOGIQ Totus activity and print the message “Please wait -
Shutdown in progress” in the display on the operator panel.
Next, it starts to shut down. The time to turn down the LOGIQ Totus, including the back end, may
vary from 10 seconds up to approximately 1 minute.
The last thing that shuts down, is the light on the operator panel, indicating that you can continue
with the next step.
3.) Switch off the Mains Power Circuit Breaker, located on the rear of the LOGIQ Totus. This will cut
power distribution within the LOGIQ Totus.
Table 4-3 SYSTEM - EXIT Menu
Corresponding Graphic
The SYSTEM - EXIT menu, used when switching OFF the LOGIQ Totus, gives you these
choices:
Logoff:
Use this button to log off the current user.
The Ultrasound system remains ON and ready for a new user to log on.
If the Logoff button is dimmed, it indicates that no user is logged on to the LOGIQ Totus at the
moment.
Shutdown:
Use this button to shut down the Ultrasound system. The entire system will shut down. It is
recommended to perform a full shutdown at least once a week.
If the Shutdown button is dimmed, press the ON/OFF button or Alt+F10 to shut down the
LOGIQ Totus.
Cancel:
Use this button to exit from the SYSTEM - EXIT menu and return to the previous operation.
Exit (Only available when logged in as GE HealthCare Service with an SSA key):
Select this button when you want to exit to the Windows desktop.
NOTICE
Risk of losing data. Be sure to wait with the next step until the LOGIQ Totus has finished its shut-down.
Failing to do so may destroy data on the hard disk drive, making the LOGIQ Totus fail later.

GE LOGIQ Totus Specifications

General

Brand	GE
Model	LOGIQ Totus
Category	Medical Equipment
Language	English