GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
4 - 22 Section 4-3 - Functional Checks
4-3-10 System CFM and PWD functional checks
For information on the Ultrasound system’s different modes as well as expected results, the Basic User
Manual will familiarize you with image optimization for B-Mode, M-Mode, Color Flow, and Doppler.
For complete information the appropriate version of the LOGIQ Totus Basic User Manual, Chapter 5,
or the appropriate LOGIQ Totus Release Notes. 1-2-4-1 "LOGIQ Totus Options" on page 1-5.
Preparations
You may use a phantom (optional) when doing these tests.
1.) Connect one of the probes, to the scanner’s active probe connector.
2.) Turn ON the scanner.
4-3-11 Color Mode functional checks
Color Flow screens are B- or M-Mode screens with colors representing blood or tissue movement. Color
Flow may be selected both from B-Mode, or from M-Mode, or a combination of these screens.
For more information the appropriate version of the LOGIQ Totus Basic User Manual, Chapter 5, or the
appropriate LOGIQ Totus Release Notes.
4-3-12 Color B-Mode functional checks
For information the appropriate version of the LOGIQ Totus Basic User Manual, Chapter 5, or the
appropriate LOGIQ Totus Release Notes.
4-3-13 Color M-Mode functional checks
For information the appropriate version of the LOGIQ Totus Basic User Manual, Chapter 5, or the
appropriate LOGIQ Totus Release Notes.
• Check Horizontal Sweep, PRF, Baseline, and Invert.
• Check Variance, Color Maps, and Cineloop.
• Check Frequency and Acoustic Power.
• Adjust ROI.
To Next Page
Need help?
General
