GE HealthCare CONFIDENTIAL
DIRECTION 5936427, REV. 1 LOGIQ TOTUS Basic Service Manual
Section 8-2 - Warnings and important information 8 - 5
8-2-6 Tools needed for servicing the LOGIQ Totus
The following tools are needed to service the LOGIQ Totus. If the torque is not indicated with the
procedure, hand tighten the screws/nuts.
Table 8-2 Tools Used for Servicing LOGIQ Totus
Tool Type Tool Size GE HealthCare Part Number
Torx Driver
BIT # TX-5 Use available equivalent
BIT # TX-8
29-899073-00 or available equivalent
BIT # TX-10
BIT # TX-15
BIT # TX-20
BIT # TX-25
BIT # TX-30*
BIT # TX-45*
Use available equivalent
Flat-head
Screwdriver
1/4 inch or 6 mm 5384716 or use available equivalent
Phillips Screwdriver
#1
46-258100P92 or use equivalent
available
#2 and #2 “Stubby"
46-258100P93 or use equivalent
available
#3 46-320688P4 or available equivalent
Nut Driver
7 mm, 10 inches long
Use available equivalent
1/4”
Hex Wrench
0.9 mm
Use available equivalent
1 mm
1.5 mm
2 mm
3 mm
4 mm
5 mm
6 mm
8 mm
10 mm
Open End Wrench
2 mm
Use available equivalent
3 mm
4 mm
5 mm
10 mm
13 mm
3/16 inch
Torque Wrench Kit^
Two wrenches and one driver includes extra batteries.
Covers 5 lb-in to 250 lb-ft (0.55 Nm to 339 Nm)**
5135228 or available equivalent
Adjustable Wrench 152 mm (6 inches) long Use available equivalent
Pry Bar Approximately 18 inches (457 mm) overall Use available equivalent
Drill Bosch GSR 12-2-LI Cordless Drill 5815870 or available equivalent
Digital Multimeter^ Digital Multimeter, Model 2020 2102278-050 or available equivalent
Digital Multimeter Test Leads Test Leads Pomona kit 5110653 or available equivalent
Safety Analyzer^ Fluke ESA 612 120V Safety Analyzer Service Tool 5453348-2 or available equivalent
ESD Vacuum Cleaner Vacuum cleaner 46-194427P392 or available equivalent
Grease Krytox 227 by DuPont 2301-0478-00
Chapman Kit Number 7331 Use available equivalent
Thumb Drive Class M SSA 5431898-3 or available equivalent
To Next Page
Loading...
Need help?
General
