GE MEDICAL SYSTEMS
D
IRECTION 2300164-100, REVISION 7 VIVID™ 3 PRO/VIVID™ 3 SERVICE MANUAL
3-52 Section 3-7 - Connectivity Setup
3-7-3 Setting Up for Connectivity
Notes:
• Four passwords are required to complete the setup of the connectivity options. Ensure that all these
passwords are installed on the Vivid™ 3 ultrasound unit before you begin the configuration procedure.
• The 3rd Connector option is available for use with Vivid™ 3 BT03 systems.
• The HL7 option (not listed) is a licence granting permission to connect the system to the HL7 gateway,
through the EchoPAC. This function (which is configured on EchoPAC, not on the Vivid™ 3 system)
is used to export examination results to the Hospital Information System (HIS), through HL7 protocol.
Users requiring this option should contact the GE representative.
1) Press Config on the alphanumeric keyboard. The System Configuration window is displayed.
2) Trackball to the System Options tab and press Select. The System Options tab is displayed, as
shown below:
Figure 3-33 System Options Tab
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
