HIKVISION DS-K1A802A Series - Add Timetable

Congure Report Display
You can congure display contents displayed in the aendance report, such as the company name,
logo, date format,
me format, and mark.
Steps
1.
Enter Time & Aendance module.
2.
Click Aendance Stascs → Report Display .
3.
Set the display
sengs for aendance report.
Company Name
Enter a company name to display the name in the report.
Aendance Status Mark
Enter the mark and select the color. The related elds of aendance status in the report will
display with the mark and color.
Weekend Mark
Enter the mark and select the color. The weekend elds in the report will display with the
mark and color.
4.
Click Save.
6.9.2 Add Timetable
You can add the metable for the shi schedule.
Steps
1.
Click Time & Aendance → Timetable to enter metable sengs window.
2.
Click Add to enter Add Timetable page.
3.
Create a name for the
metable.
4.
Select calculaon method.
First In & Last Out
The
rst check-in me is recorded as start work me and the last check-out me is recorded
as the end-work me.
Each Check-In/Out
Each check-in me and check-out me is valid and the sum of all periods between adjacent
check-in and check-out
me will be recorded as the valid working duraon.
You need to set Valid Auth. Interval for this calculaon method. For example, if the interval
between card swiping of the same card is less than the set value, the card swiping is invalid.
5.
Oponal: Set Enable T&A Status switch to on to calculate according to aendance status of the
device.
6.
Set the related
aendance me.
Start/End-Work Time
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
92