To Next Page

To Previous Page

Move the cursor and select System → A. Status to enter the Aendance Status page.

Move the cursor and select Aendance Mode and set the aendance mode as Disable.

Figure 5-8 Disable Aendance Mode

The aendance status funcon is disabled, and you will not view or congure the aendance

status on the inial page.

5.7 Time and

Aendance Management

Manage department, shi, holiday, schedule, and report.

You can add, edit, delete department/shi/holiday/schedule. You can also export the aendance

report.

5.7.1 Manage Department (Edit/Search/Reset)

You can edit the department name, view the shi type and the shi name. You can also search the

department by department name, or reset department parameters.

Edit Department

Move the cursor to the Dept., and press OK to enter the department list.

Select a department from the list and select Edit, and press OK to enter the Edit Dept. page. You

can edit the department name, view the

shi type and the shi name.

DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual

HIKVISION DS-K1A802A Series User Manual

Other manuals for HIKVISION DS-K1A802A Series