HIKVISION DS-K1A802A Series User Manual

-
On the device list page, if the page is in the list mode, swipe the device name to the le and
tap .
-
On the device list page, if the page is in thumbnail mode, tap the device name or tap .
-
On the Live View page, tap
and then tap Sengs.
Note
For details about how to enter the Live View page, see Start and Stop Live View on the user
manual of Hik-Connect mobile client.
For details about how to enter the Live View page, see Start and Stop Live View on the user
manual of Guarding Vision mobile client.
2.
Tap Door Open Duraon to open the Door Open Duraon list.
3.
Select a
duraon from the list.
4.
Tap to conrm the selecon.
If you tap Open Door in the door control page, the door will open for the congured me
duraon.
Note
For details about controlling door status, see Control Door Status.
9.3 Change Super Password
The Mobile Client allows you to change the super password of the access control device, which can
be used to open all the access control points (e.g., doors), even when the access control point is in
remaining closed status.
Before You Start
Add an access control device to the Mobile Client. See Add Device for Management in the user
manual of Hik-Connect mobile client for details.
Steps
Note
For details about super password of the access control device, see the user manual of the device.
1.
Enter the Sengs page of the access control device.
-
On the device list page, if the device list is in list mode, swipe the name of the access control
device to the le and tap .
-
On the device list page, if the device list is in thumbnail mode, tap the name of the access
control device or tap .
-
On the Live View page. tap and then tap Sengs.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
115

HIKVISION DS-K1A802A Series Specifications

General

Brand	HIKVISION
Model	DS-K1A802A Series
Category	Touch terminals
Language	English