HIKVISION DS-K1A802A Series User Manual

Chapter 6 Client Soware Conguraon
You can operate the device and manage the data via the client soware.
Note
The introducon of the client soware in this document is depending on the V3.1.
6.1 Add Device
Aer running the client, devices including access control devices, security control panels, etc.,
should be added to the client for the remote conguraon and management, such as controlling
door status,
aendance management, event sengs, etc.
6.1.1 Add Online Device
The acve online devices in the same local subnet with the client soware will be displayed on the
Online Device area.
Note
●
You can click Refresh per 60s to refresh the informaon of the online devices.
●
SADP log funcon can be enabled or disabled by right-clicking Online Device.
Add Single Online Device
You can add single online device to the client soware.
Steps
1.
Enter the Device Management module.
2.
Oponal: Click on the right of Device Management and select Device.
3.
Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4.
Select an online device from the Online Device area.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to Acvaon .
5.
Click Add to open the device adding window.
6.
Enter the required
informaon.
Name
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
45

HIKVISION DS-K1A802A Series Specifications

General

Brand	HIKVISION
Model	DS-K1A802A Series
Category	Touch terminals
Language	English