HIKVISION DS-K1T341B Series User Manual

8.4.3 Issue a Card to One Person
When adding person, you can issue a card with a unique card number to the person as a
credenal. Aer issued, the person can access the doors which he/she is authorized to access by
swiping the card on the card reader.
Steps
Note
Up to ve cards can be issued to one person.
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Credenal → Card panel, click +.
4. Enter the card number.
-
Enter the card number manually.
-
Place the card on the card enrollment
staon or card reader and click Read to get the card
number. The card number will display in the Card No.
eld automacally.
Note
You need to click Sengs to set the card issuing mode and related parameters rst. For
details, refer to Set Card Issuing Parameters .
5. Select the card type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
Duress Card
When the person is under duress, he/she can swipe the duress card to open the door. The
door will be unlocked and the client will receive a duress event to
nofy the security
personnel.
Patrol Card
This card is used for the
inspecon sta to check the their aendance of inspecon. By
swiping the card on the specied card reader, the person is marked as on duty of inspecon
at that me.
Dismiss Card
By swiping the card on the card reader, it can stop the buzzing of the card reader.
6. Click Add.
DS-K1T341B Series Face Recognion Terminal User Manual
89

HIKVISION DS-K1T341B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341B Series
Category	Touch terminals
Language	English