HIKVISION DS-K1T341B Series User Manual

Note
Do not power o during the upgrading.
7.5.6 Change Administrator's Password
Steps
1. Click
Conguraon → User Management .
2. Click .
3. Enter the old password and create a new password.
4.
Conrm the new password.
5. Click OK.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7.5.7 Network Sengs
Set TCP/IP, port, Wi-Fi parameters, report strategy and plaorm access.
Note
Some device models do not support Wi-Fi sengs. Refer to the actual products when
conguraon.
Set Basic Network Parameters
Set TCP/IP Parameters
Click Conguraon → Network → Basic Sengs → TCP/IP .
DS-K1T341B Series Face Recognion Terminal User Manual
62

HIKVISION DS-K1T341B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341B Series
Category	Touch terminals
Language	English