HIKVISION iDS-9600NXI-I16/4F Series User Manual

7.2 Task Conguraon
You can view the task status in task conguraon. Smart analysis results are used for ltering the
pictures when searching interested human body and vehicle pictures.
Before You Start
Check Save VCA Pictures for human body detecon/vehicle detecon, line crossing detecon,
intrusion detecon, region entrance, or region exing.
Steps
Note
The chapter is only available for certain models of iDS series.
1. Go to Smart Analysis → Engine Sengs → Task Conguraon .
2. Check cameras to enable corresponding analysis mode. Ensure engine is available for the
selected analysis mode.
3. Enable auto analysis.
Figure 7-2 Auto Analysis
1) Click Edit.
2)
Oponal: Check Enable of Display Status and Nofy Surveillance Center.
3) Set Start Time of video to analyze.
4) Click OK.
4. Check cameras and click Enabled to start analyzing.
Task status includes 3
condions: Disabled, Waing, and Enabled.
Disabled
No analysis task is enabled on the camera.
Waing
Network Video Recorder User Manual
81

HIKVISION iDS-9600NXI-I16/4F Series Specifications

General

Brand	HIKVISION
Model	iDS-9600NXI-I16/4F Series
Category	Network Hardware
Language	English