●
When Do not Play Normal Videos is checked, the device will skip the normal video and play the
smart (moon/line crossing/intrusion) video and the custom (searched video) only in the normal
speed (X1).
●
When Do not Play Normal Videos is unchecked, you can set the play speed for the normal video
the smart/custom video separately. The speed range is from X1 to XMAX.
Note
You can set the speed in the single-channel play mode only.
4.3.3 Edit Video Clips
You can cut and export video clips during playback.
Steps
1. Go to Playback.
2. Click
at the boom toolbar.
3. Set the start me and end me. You can click to set the me period, or set a me segment on
me bar.
4. Click to save the video clip to a storage device.
4.3.4 Switch between Main Stream and Sub-Stream
You can switch between the main stream and the sub-stream during the playback.
Icon
Descripon
Play the video in main stream.
Play the video in sub-stream.
Note
The encoding parameters for the main stream and sub-stream can be congured in Storage →
Encoding Parameters .
4.3.5 Thumbnails View
With the thumbnails view on the playback interface, you can conveniently locate the required
video
les on the me bar.
In the playback mode, posion the cursor on me bar to get preview thumbnails.
Network Video Recorder User Manual
53