HIKVISION iDS-9600NXI-I16/4F Series User Manual

other. If mulple devices are congured for the UPnP™ sengs under the same router, the
value of the port No. for each device should be unique.
4. Enter the virtual server seng page of router; ll in the blank of Internal Source Port with the
internal port value, the blank of External Source Port with the external port value, and other
required contents.
Note
●
Each item should be corresponding with the device port, including server port, hp port, RTSP
port and hps port.
●
The virtual server seng interface below is for reference only, it may be dierent due to
dierent router manufactures. Please contact the manufacture of router if you have any
problems with
seng virtual server.
Figure 12-3 Set Virtual Server Item
12.4 Congure SNMP
You can congure SNMP sengs to get device status and parameter informaon.
Before You Start
Download the SNMP
soware to receive device informaon via the SNMP port. By seng the trap
address and port, the device is allowed to send alarm events and excepon messages to the
surveillance center.
Steps
1. Go to System → Network → Advanced → SNMP .
Network Video Recorder User Manual
142

HIKVISION iDS-9600NXI-I16/4F Series Specifications

General

Brand	HIKVISION
Model	iDS-9600NXI-I16/4F Series
Category	Network Hardware
Language	English