Hirschmann PowerMICE User Manual

Operation Diagnosis
UM Basic Configuration L3P
Release 7.1 12/2011
9.9 Detecting IP Address Conflicts
237
9.9.2 Configuring ACD
9.9.3 Displaying ACD
 Select the Diagnostics:IP Address Conflict Detection dialog.
 With "Status" you enable/disable the IP address conflict detection or
select the operating mode (see table 30).
 Select the
Diagnostics:IP Address Conflict Detection dialog.
 In the table, the device logs IP address conflicts with its IP address.
The device logs the following data for each conflict:
 the time
 the conflicting IP address
 the MAC address of the device with which the IP address conflicted.
For each IP address, the device logs a line with the last conflict that
occurred.
 During a restart, the device deletes the table.
Figure 57: IP Address Conflict Detection dialog

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English