Entering the IP Parameters
UM Basic Configuration L3P
Release
7.1
12/2011
2.4
Loading the system configuration
from the ACA
39
2.4 Loading the system
configuration from the ACA
The AutoConfiguration Adapter (ACA) is a device for
for saving the device configuration data and
saving the device software.
If a device becomes inoperative, the ACA allows the configuration data to be
re-applied to a replacement device of the same type.
When the device is started, it checks to see whether a ACA is present. If an
ACA is present with a valid password and valid software, the device loads the
configuration data from the ACA.
The password is valid if
the entered password matches the password in the ACA, or
the preset password in the device is entered.
To save the configuration data in the ACA, see “Saving locally (and on the
ACA)” on page 64.
To Next Page
Loading...
Need help?
General
