Entering the IP Parameters
36
2.3
Entering the IP Parameters via
HiDiscovery
UM Basic Configuration L3P
Release
7.1
12/2011
2.3 Entering the IP Parameters
via HiDiscovery
The HiDiscovery protocol enables you to assign IP parameters to the device
via the Ethernet.
You can easily configure other parameters via the Web-based interface (see
the "GUI" (Graphical User Interface / Web-based Interface) reference
manual).
Install the HiDiscovery software on your PC. The software is on the CD
supplied with the device.
To install it, you start the installation program on the CD.
Start the HiDiscovery program.
Figure 10: HiDiscovery
To Next Page
Loading...
Need help?
General
