Hirschmann PowerMICE User Manual

Assistance in the Protection from Un-
authorized Access
94
6.3 Telnet/internet/SSH access
UM Basic Configuration L3P
Release 7.1 12/2011
6.3 Telnet/internet/SSH access
6.3.1 Description of Telnet Access
The Telnet server of the device allows you to configure the device using the
Command Line Interface (in-band). You can deactivate the Telnet server to
inactivate Telnet access to the device.
The server is activated in its state on delivery.
After the Telnet server has been deactivated, you will no longer be able to
access the device via a new Telnet connection. If a Telnet connection already
exists, it is retained.
Note: The Command Line Interface (out-of-band) and the
Security:Telnet/Web access dialog in the Web-based interface allow
you to reactivate the Telnet server.

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English