Hirschmann PowerMICE User Manual

Setting up the Configuration
Environment
278
A.2 Setting up a DHCP Server with
Option 82
UM Basic Configuration L3P
Release 7.1 12/2011
A.2 Setting up a DHCP Server
with Option 82
On the product CD supplied with the device you will find the software for a
DHCP server from the software development company IT-Consulting Dr.
Herbert Hanewinkel. You can test the software for 30 calendar days from the
date of the first installation, and then decide whether you want to purchase a
license.
 To install the DHCP servers on your PC
put the product CD in the CD drive of your PC and
under Additional Software select “haneWIN DHCP-Server”.
To carry out the installation, follow the installation assistant.
 Start the DHCP Server program.
Figure 74: Start window of the DHCP server
Note: The installation procedure includes a service that is automatically
started in the basic configuration when Windows is activated. This service is
also active if the program itself has not been started. When started, the
service responds to DHCP queries.

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English