Hitron CGNV2 User Manual

10
HITRON CGNV2 USER’S GUIDE
VPN
8.4 THE PPTP SCREEN
Use this screen to configure PPTP function. You can turn PPTP function on or off and
configure the settings.
Click VPN > PPTP. The following screen displays.
ESP AUTH
Use this field to select the type of ESP Authentication you
want to use.
See Cryptographic Hash Function on page 98
for information on the screen that displays.
MD5
SHA
SHA2_256
NOTE: The options that display depend on the IPsec
Operation you selected.
AH
Use this field to select the type of AH Authentication you
want to use. See
Cryptographic Hash Function on page 98
for information on the screen that displays.
MD5
SHA
SHA2_256
NOTE: The options that display depend on the IPsec
Operation you selected.
Tunnel Type
Use this field to select whether the type of the tunnel is
public or private.
IPsec Life Duration Use this field to enter the IPsec Life Duration value in
seconds.
Tunnel Remote Host Configuration
IP type
This displays the nature of the IP.
NOTE: Leave this field at its default.
IP Address
Use this field to enter the allowed IP address for the
tunnel’s connection.
Subnet Mask Use this field to enter the tunnel’s subnet mask.
Back
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Apply
Click this to save your changes to the fields in this screen.
Cancel
Click this to return the fields in this screen to their last-
saved values without saving your changes.
TABLE 35: The VPN > IPsec > Add/Edit Screen (continued)

Hitron CGNV2 Specifications

General

Brand	Hitron
Model	CGNV2
Category	Wireless Router
Language	English