Hitron CGNV2 User Manual

32
HITRON CGNV2 USER’S GUIDE
CABLE
2.3 THE INITIALIZATION SCREEN
This screen displays the steps successfully taken to connect to the Internet over the
CATV connection.
Use this screen for troubleshooting purposes to ensure that the CGNV2 has
successfully connected to the Internet; if an error has occurred you can identify the
stage at which the failure occurred.
NOTE: This screen displays when you first log in to the CGNV2.
Click Cable > Initialization. The following screen displays.
Primary BSSID
MAC Address
This displays the Media Access Control (MAC) address of
the CGNV2’s Basic Service Set IDentifier (BSSID). This is
the MAC address of the wireless module to which wireless
clients connect.
NOTE: You may have additional BSSIDs, depending on
your contract with your service provider.
WAN MAC Address This displays the Media Access Control (MAC) address of
the module that connects to the Internet through the CATV
connection when the CGNV2 is in routing mode.
System Time This displays the current date and time.
Network Access This field displays when you are connected to your service
provider, and shows whether or not your service provider
allows you to access the Internet over the CATV
connection.
Permitted displays if you can access the Internet.
Denied displays if you cannot access the Internet.
System Uptime This displays the number of days, hours, minutes and
seconds since the CGNV2 was last switched on or
rebooted.
TABLE 7: The Cable > System Info Screen (continued)

Hitron CGNV2 Specifications

General

Brand	Hitron
Model	CGNV2
Category	Wireless Router
Language	English