Hitron CGNV2 User Manual

44
HITRON CGNV2 USER’S GUIDE
WAN/LAN
The following table describes the labels in this screen.
3.3 THE DEBUG SCREEN
Use this screen to perform ping and traceroute tests on IP addresses or URLs.
Click WAN/LAN > Debug. The following screen displays.
FIGURE 12: The WAN/LAN > Debug Screen
The following table describes the labels in this screen.
TABLE 11: The WAN/LAN > LAN IP > Add/Edit Screen
Reserved IP
MAC Address Use this field to enter the Media Access Control (MAC)
address of the network device.
Static IP Address Use this field to enter the static IP address.
Comment Use this field to enter your comment.
Back Click this to return to the previous screen without saving
changes.
Apply Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
TABLE 12: The WAN/LAN > Debug Screen
IP/URL Enter the IP address or URL that you want to test.
Method Select the type of test that you want to run on the IP/
URL that you specified.
Run Click this to perform the test.
Help Click this to see information about the fields in this
screen.

Hitron CGNV2 Specifications

General

Brand	Hitron
Model	CGNV2
Category	Wireless Router
Language	English