Hitron CGNV2 User Manual

64
HITRON CGNV2 USER’S GUIDE
FIREWALL
4.6.1 ADDING OR EDITING A PORT TRIGGERING RULE
To add a new port triggering rule, click Add in the Firewall > Port Triggering
screen.
To edit an existing port triggering rule, select the rule’s radio button ( ) in the
Firewall > Port Triggering screen and click the Edit button.
The following screen displays.
FIGURE 22: The Firewall > Port Triggering > Add/Edit Screen
Enable Use this field to turn each port triggering rule on or off.
Select this checkbox to enable the port triggering
rule.
Deselect this checkbox to disable the port triggering
rule.
Add New Click this to define a new port triggering rule. See
Adding or Editing a Port Triggering Rule on page 64 for
information on the screen that displays.
Edit Select a port triggering rule’s radio button ( ) and click
this to make changes to the rule. See
Adding or Editing
a Port Triggering Rule
on page 64 for information on the
screen that displays.
Delete Select a port triggering rule’s radio button ( ) and click
this to remove the rule. The deleted rule’s information
cannot be retrieved.
Apply Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
TABLE 21: The Firewall > Port Triggering Screen

Hitron CGNV2 Specifications

General

Brand	Hitron
Model	CGNV2
Category	Wireless Router
Language	English