Hitron CGNV2 User Manual

87
HITRON CGNV2 USER’S GUIDE
WIRELESS
FIGURE 30: The Wireless > Access Control Screen
The following table describes the labels in this screen.
TABLE 28: The Wireless > Access Control Screen
MAC Filtering
SSID Select the SSID for which you want to configure wireless
access control.
NOTE: At the time of writing, the CGNV2 supports a
single SSID.
MAC Filtering Mode Use this field to control whether the CGNV2 performs
MAC filtering on the wireless network.
Select Allow-All to turn MAC filtering off. All devices
may access the CGNV2 and the network wirelessly.
Select Allow to permit only devices with the MAC
addresses you set up in the Wireless Control List to
access the CGNV2 and the network wirelessly. All
other devices are denied access.
Select Deny to permit all devices except those with
the MAC addresses you set up in the Wireless
Control List to access the CGNV2 and the network
wirelessly. The specified devices are denied access.
Apply Click this to save your changes in the MAC filtering
section.
Wireless Control List (up to 16 Items)

Hitron CGNV2 Specifications

General

Brand	Hitron
Model	CGNV2
Category	Wireless Router
Language	English