Honeywell CK75 User Manual

100 75 Series Mobile Computer User Guide
Install Applications with Microsoft Synchronization Software
When you only have a few computers to update with applications, you can copy
files using Microsoft synchronization software. This procedure assumes that
Microsoft synchronization software is installed on your PC and is up and running.
1. Connect to the mobile computer through the synchronization software.
2. Copy the .cab files from your development PC to the mobile computer.
3. Reboot or cold boot the computer.
4. After the boot process is finished, browse to the .cab files and tap the files to
install them.
Install Applications Using a microSD Card
Use a microSD card to install applications on one computer at a time or if you do
not have a network connection.
1. Copy your application file to the microSD card.
2. Insert the microSD card into the mobile computer.Note: You need to manually
reset the computer after you install the storage card.
3. On the mobile computer, browse to the SD Card folder and run your application.
Launch Applications Automatically
There are two ways to launch applications automatically on a cold boot:
• Set up your application .cab file to place a shortcut to the application in the
\Windows\StartUp directory at install time.
• Use AutoRun to start your application at boot time. AutoRun ships on the
computer and automates other operations. At boot time, AutoRun executes any
commands found in its data file, Autouser.dat. For more information on using
AutoRun, see the Readme.txt file located in the My Device\Flash File Store\2577
directory on the computer.
How to Update the System Software
The mobile computer uses SmartSystems bundles to update the operating system
(OS) and the system software.
You can use these methods to update your mobile computer:
• You can update individual computers, or multiple computers at the same time,
using the SmartSystems console. For help, see the next section.
• You can update individual computers using a microSD card.

Honeywell CK75 Specifications

General

HDD capacity	256 GB
DisplayPorts quantity	3
Audio (L/R) in	0
Composite video out	5.6
DVI-D ports quantity	-
DVI-I ports quantity	5
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0.7
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Display diagonal	3.5 \
Display resolution	480 x 640 pixels
Display number of colors	65536 colors
Flash memory	16 GB
Internal memory	0.002 GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	OMAP 4470
Processor frequency	1.5 GHz
Processor manufacturer	Texas Instruments
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Battery capacity	5200 mAh
Operating system installed	Windows Embedded Handheld 6.5
Certification	WEEE, RoHS
Product color	Black
Keyboard layout	Numeric
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	4.0
Security algorithms	802.1x RADIUS, AES, CCX v4, TKIP, WAPI, WEP, WPA, WPA2
Built-in camera	No
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	50 mm
Width	80 mm
Height	237 mm
Weight	584 g