Honeywell CK75 User Manual

26 75 Series Mobile Computer User Guide
Adjust the Speaker Volume
The computer volume includes sounds you hear when you tap the screen or scan
bar codes. You can modify the volume level, switch to vibrate mode or turn both
sound and vibration off.
1. Tap the Title bar at the top of the screen.
2. Tap the Volume icon .
3. Use your stylus to adjust the volume slider, or use the side volume buttons to
change the volume setting.
4. Tap OK.
About the Imager
The internal imager can read 1D and 2D bar code symbologies, composite
symbologies, and postal codes. You can also use the internal imager to take
pictures as if it were a camera or use the integrated flash as a flashlight.
You can also use Bluetooth communications to connect the computer to cordless
scanners, such as the Granit™ 1981i and 1911i.
Use the Imager as a Flashlight
By default, the imager is set to read bar codes. To use the imager as a flashlight,
you must remap the Left side lower button.
1. Open Enterprise Settings on the mobile computer by tapping
Start > Settings > System > Enterprise Settings.
2. Tap Device Settings > Keypad > Button Remapping.
3. Select Flashlight under “Left side lower button”.
4. From the Flashlight timeout drop-down menu, select how long to leave the
flashlight on before it automatically turns off.
5. Tap OK.
Scan Bar Codes
The internal imager supports omni-directional (360°) bar code scanning. An
aiming beam is provided to help assist with targeting when scanning bar codes.
Note: Before you start scanning bar codes, use the Settings app to enable only the bar code
symbologies that you need. By reducing the active symbology list, you can increase
the scan speed.

Honeywell CK75 Specifications

General

HDD capacity	256 GB
DisplayPorts quantity	3
Audio (L/R) in	0
Composite video out	5.6
DVI-D ports quantity	-
DVI-I ports quantity	5
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0.7
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Display diagonal	3.5 \
Display resolution	480 x 640 pixels
Display number of colors	65536 colors
Flash memory	16 GB
Internal memory	0.002 GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	OMAP 4470
Processor frequency	1.5 GHz
Processor manufacturer	Texas Instruments
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Battery capacity	5200 mAh
Operating system installed	Windows Embedded Handheld 6.5
Certification	WEEE, RoHS
Product color	Black
Keyboard layout	Numeric
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	4.0
Security algorithms	802.1x RADIUS, AES, CCX v4, TKIP, WAPI, WEP, WPA, WPA2
Built-in camera	No
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	50 mm
Width	80 mm
Height	237 mm
Weight	584 g

Summary

About the Computer Features

About the 75 Series Mobile Computers

Introduces the 75 Series Mobile Computers, their operating system, and general characteristics.

About the Battery

Details the rechargeable Lithium-ion battery packs used by the computers and their specifications.

About the Keypad

Use the Phone

About the Phone

Details the phone features, speaker, microphone, and Bluetooth headset support.

How to Add and Switch Between Network Carriers

Explains how to add carriers and switch between WWAN networks.

Activate the UMTS Phone

Provides steps to activate the UMTS phone using a SIM card.

Activate the CDMA Phone

Guides on activating the CDMA radio module with a wireless carrier.

Use the Camera

About the Color Camera

How to Take Pictures and Record Videos

Explains using the Pictures & Videos application for capturing media.

How to Read Bar Codes with the Camera

Configure the Computer

How to Configure the Computer

Details methods for configuring parameters like symbologies and network settings.

About Enterprise Settings on the Computer

Explains how to use Enterprise Settings to configure Honeywell applications.

Configure the Computer Remotely with SmartSystems

Configure 802.11 Radio Communications

About Bluetooth Communications

How to Make Your Security Choice

Discusses security options like Funk, Microsoft, and Reliable Access Client (RAC).

Manage the Computer

How to Manage the Computer in Your Network

Essential ways to manage updates, configure devices, and troubleshoot remotely.

Manage the Computer Using SmartSystems

Utilizes SmartSystems software platform for managing devices from a central server.

How to Develop and Install Applications

How to Update the System Software

Describes methods for updating the operating system and system software.

Troubleshoot and Maintain the Computer

About the Dashboard

Explains the dashboard for proactive monitoring and troubleshooting device issues.

About Troubleshoot the Computer

Provides troubleshooting sections for common problems and device operation.

Wi-Fi Connection Problems

802.1x Security Problems

Troubleshoot the Scanner with Scan Diagnostic

Problems Reading Bar Codes

How to Restart the Computer

Specifications

Physical and Environmental Specifications

Lists the physical dimensions, weight, and environmental operating conditions.

CN75/CN75e

CK75

Imager Specifications