Honeywell CK75 User Manual

24 75 Series Mobile Computer User Guide
Configure the Heater Feature
You can configure the following parameters in Enterprise Settings or the computer
registry to optimize the operation of the heaters to fit your specific application
environment.
Heater Setting Description
Temperature monitoring
Registry Key: TempMonitoring
Enable or Disable the heater feature and temperature
monitoring.
In freezer heater activation
Registry Key: PreemptiveHeating
Enable or Disable the automatic pre-heat feature.
When enabled, modify the following parameters:
• Pre-heat enable delay timer
• Pre-heat power level
Heater enabled temperature
Registry Key: EnableT
Set the temperature (°C) that the computer must fall to
before the heaters turn on. The Heater enabled
temperature is used to identify cold storage entry.
Once this temperature is detected, the Heater enabled
delay timer starts.
Heater enabled delay (minutes)
Registry Key: ChillTime
Set the time limit (minutes) for how long the computer
must remain at or below the defined Heater enable
temperature before:
• the heaters turn on if in Automatic mode, or
•the Pre-heat enabled delay timer starts when
In freezer activation (Preemptive mode) is
enabled.
Note: If you remove the computer from cold storage
before the timer expires, the system does not turn
on the heaters, saving battery power.
Exit freezer temperature change trigger
Registry Key: DeltaT
Set the sensitivity of the cold storage exit trigger.
To detect a cold storage exit, the computer looks for a
quick rise in temperature (°C), defined by the Exit
freezer temperature change trigger value, over a brief
period of time.
Exit freezer heater on duration
Registry Key: DurationHeater
Set the length of time (minutes) the heaters stay on at
full power (100%) once the computer detects a quick
rise in temperature, defined by the Exit freezer
temperature change trigger value (°C).
Note: The heaters may turn off before the timer has
expired if a temperature reading indicates the
computer is warm enough or you manually turn
off the heaters by tapping the heater icon once.
Pre-heat enabled delay (minutes)
Registry Key: PreemptiveDelay
Set the length of time (minutes) that the computer
waits after the Heater enabled delay timer has expired
before activating the low power pre-heat window
feature.
Pre-heat power level (%)
Registry Key: DutyCycle
Set the power level (%) of the heaters used during the
pre-heat cycle.

Honeywell CK75 Specifications

General

HDD capacity	256 GB
DisplayPorts quantity	3
Audio (L/R) in	0
Composite video out	5.6
DVI-D ports quantity	-
DVI-I ports quantity	5
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0.7
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Display diagonal	3.5 \
Display resolution	480 x 640 pixels
Display number of colors	65536 colors
Flash memory	16 GB
Internal memory	0.002 GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	OMAP 4470
Processor frequency	1.5 GHz
Processor manufacturer	Texas Instruments
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Battery capacity	5200 mAh
Operating system installed	Windows Embedded Handheld 6.5
Certification	WEEE, RoHS
Product color	Black
Keyboard layout	Numeric
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	4.0
Security algorithms	802.1x RADIUS, AES, CCX v4, TKIP, WAPI, WEP, WPA, WPA2
Built-in camera	No
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	50 mm
Width	80 mm
Height	237 mm
Weight	584 g

Summary

About the Computer Features

About the 75 Series Mobile Computers

Introduces the 75 Series Mobile Computers, their operating system, and general characteristics.

About the Battery

Details the rechargeable Lithium-ion battery packs used by the computers and their specifications.

About the Keypad

Use the Phone

About the Phone

Details the phone features, speaker, microphone, and Bluetooth headset support.

How to Add and Switch Between Network Carriers

Explains how to add carriers and switch between WWAN networks.

Activate the UMTS Phone

Provides steps to activate the UMTS phone using a SIM card.

Activate the CDMA Phone

Guides on activating the CDMA radio module with a wireless carrier.

Use the Camera

About the Color Camera

How to Take Pictures and Record Videos

Explains using the Pictures & Videos application for capturing media.

How to Read Bar Codes with the Camera

Configure the Computer

How to Configure the Computer

Details methods for configuring parameters like symbologies and network settings.

About Enterprise Settings on the Computer

Explains how to use Enterprise Settings to configure Honeywell applications.

Configure the Computer Remotely with SmartSystems

Configure 802.11 Radio Communications

About Bluetooth Communications

How to Make Your Security Choice

Discusses security options like Funk, Microsoft, and Reliable Access Client (RAC).

Manage the Computer

How to Manage the Computer in Your Network

Essential ways to manage updates, configure devices, and troubleshoot remotely.

Manage the Computer Using SmartSystems

Utilizes SmartSystems software platform for managing devices from a central server.

How to Develop and Install Applications

How to Update the System Software

Describes methods for updating the operating system and system software.

Troubleshoot and Maintain the Computer

About the Dashboard

Explains the dashboard for proactive monitoring and troubleshooting device issues.

About Troubleshoot the Computer

Provides troubleshooting sections for common problems and device operation.

Wi-Fi Connection Problems

802.1x Security Problems

Troubleshoot the Scanner with Scan Diagnostic

Problems Reading Bar Codes

How to Restart the Computer

Specifications

Physical and Environmental Specifications

Lists the physical dimensions, weight, and environmental operating conditions.

CN75/CN75e

CK75

Imager Specifications