138 75 Series Mobile Computer User Guide
Magstripe Reader Settings
This section lists the default settings used for an optional magnetic stripe reader
accessory.
Communications Settings
This section lists the default settings for the 802.11 and WWAN radios, the
Ethernet adapter, and power for the Bluetooth radio.
802.11 Radio Settings
Funk Security - Active Profile Selection
Funk Security - Profile Settings (Profile 1, 2, 3, or 4)
Magstripe Reader (MSR) Settings Default
Enable Magstripe Reader Off
Reader Model MSR
Enable USB MSR autodetect Disable
802.11 Radio Setting Default
Radio Enabled Off
Security Choice Funk Security
Allow Security Changes Enabled
Funk Security Setting Default
Active Profile Profile 1
Profile Setting Default
Hide password text Enable
Profile Label Profile_1
Network Type Infrastructure
Channel 3
SSID INTERMEC
Power Mode Enabled (Fast PSP)
8021x None
Association Open
Encryption None
Pre-Shared Key None