HP 6000 SERIES User Manual

Hardware Installation Manual
HP Series 6000
Installing the Rewritable Optical Disk Drive
1. Position the mounting tabs into the mounting slots (see Figure 5-6).
Caution
I
Keep the cables which are connected to the controller peA
positioned in the center of the chassis. The cables luay be
damaged if they are caught between the rewritable optical disk
drive
and the chassis rails.
2. Push down on the drive and slide it toward the front of the chassis until the
mounting tabs lock into the mounting slots.
3. Tighten
the T25 bracket screw into the drive bracket.
5·'0 Rewritable Optical Disk Drive Installation

HP 6000 SERIES Specifications

General

Brand	HP
Model	6000 SERIES
Category	Storage
Language	English