EasyManuals Logo
Home>HP>Switch>A5500 SI Switch Series

HP A5500 SI Switch Series User Manual

HP A5500 SI Switch Series
443 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
7
Address Description
224.0.0.4 Distance Vector Multicast Routing Protocol (DVMRP) routers
224.0.0.5 Open Shortest Path First (OSPF) routers
224.0.0.6 OSPF designated routers and backup designated routers
224.0.0.7 Shared Tree (ST) routers
224.0.0.8 ST hosts
224.0.0.9 Routing Information Protocol version 2 (RIPv2) routers
224.0.0.11 Mobile agents
224.0.0.12 Dynamic Host Configuration Protocol (DHCP) server/relay agent
224.0.0.13 All Protocol Independent Multicast (PIM) routers
224.0.0.14 Resource Reservation Protocol (RSVP) encapsulation
224.0.0.15 All Core-Based Tree (CBT) routers
224.0.0.16 Designated Subnetwork Bandwidth Management (SBM)
224.0.0.17 All SBMs
224.0.0.18 Virtual Router Redundancy Protocol (VRRP)
2. IPv6 multicast addresses
Figure 4 IPv6 multicast format
The following describes the fields of an IPv6 multicast address:
• 0xFF—The most significant eight bits are 11111111, which indicates that this address is an IPv6
multicast address.
• Flags—The Flags field contains four bits.
Figure 5 Format of the Flags field
Table 4 Description on the bits of the Flags field
Bit Descri
p
tion
0 Reserved, set to 0
R
• When set to 0, it indicates that this address is an IPv6 multicast address without an
embedded RP address.
• When set to 1, it indicates that this address is an IPv6 multicast address with an
embedded RP address—the P and T bits must also be set to 1.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5500 SI Switch Series and is the answer not in the manual?

HP A5500 SI Switch Series Specifications

General IconGeneral
BrandHP
ModelA5500 SI Switch Series
CategorySwitch
LanguageEnglish

Related product manuals