EasyManuals Logo
Home>HP>Switch>A5500 SI Switch Series

HP A5500 SI Switch Series User Manual

HP A5500 SI Switch Series
443 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #268 background imageLoading...
Page #268 background image
256
IPv6 multicast data that fails the ACL check is not sent to this port. In this way, the service provider can
control the VOD programs provided for multicast users.
Configuring an IPv6 multicast group filter globally
Follow these steps to configure an IPv6 multicast group globally:
To do... Use the command... Remarks
Enter system view system-view —
Enter MLD snooping view mld-snooping —
Configure an IPv6 multicast group
filter
group-policy acl6-number [ vlan
vlan-list ]
Required
By default, no IPv6 group filter is
globally configured. That is, the
hosts in a VLAN can join any
valid multicast group.
Configuring an IPv6 multicast group filter on a port or a group of ports
Follow these steps to configure an IPv6 multicast group filer on a port or a group of ports:
To do... Use the command... Remarks
Enter system view system-view —
Enter Ethernet interface view,
Layer 2 aggregate interface view,
or port group view
interface interface-type interface-
number
Required
Use either approach
port-group manual port-group-
name
Configure an IPv6 multicast group
filter
mld-snooping group-policy acl6-
number [ vlan vlan-list ]
Required
By default, no IPv6 group filter is
configured on an interface. That
is, the hosts on the interface can
join any valid multicast group.
Configuring IPv6 multicast source port filtering
When the IPv6 multicast source port filtering feature is enabled on a port, the port can connect only to
IPv6 multicast receivers rather than multicast sources. The reason is that the port blocks all IPv6 multicast
data packets but it permits multicast protocol packets to pass.
If this feature is disabled on a port, the port can connect to both multicast sources and IPv6 multicast
receivers.
Configuring IPv6 multicast source port filtering globally
Follow these steps to configure IPv6 multicast source port filtering:
To do... Use the command... Remarks
Enter system view system-view —
Enter MLD snooping view mld-snooping —
Enable IPv6 multicast source port
filtering
source-deny port interface-list
Required
Disabled by default

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5500 SI Switch Series and is the answer not in the manual?

HP A5500 SI Switch Series Specifications

General IconGeneral
BrandHP
ModelA5500 SI Switch Series
CategorySwitch
LanguageEnglish

Related product manuals