HP A5500 SI Switch Series User Manual

227
To do… Use the command… Remarks
Configure preferences for external,
internal, local MBGP routes
preference { external-preference
internal-preference local-
preference | route-policy route-
policy-name }
Optional
The default preferences of
multicast MBGP eBGP, MBGP
iBGP, and local MBGP routes are
255, 255, and 130,
respectively.
Configuring the default local preference
Follow these steps to configure the default local preference:
To do… Use the command… Remarks
Enter system view system-view
—
Enter BGP view bgp as-number
—
Enter IPv4 MBGP address family
view
ipv4-family multicast
—
Configure the default local
preference
default local-preference value
Optional
100 by default.
Configuring the MED attribute
When other conditions of routes to a destination are identical, the route with the smallest MED is
selected.
Follow these steps to configure the MED attribute:
To do… Use the command… Remarks
Enter system view system-view
—
Enter BGP view bgp as-number
—
Enter IPv4 MBGP address family
view
ipv4-family multicast
—
Configure the
MED attribute
Configure the
default MED value
default med med-value
Optional
0 by default.
Enable the
comparison of the
MED of routes from
different ASs
compare-different-as-med
Optional
Not enabled by default
Enable the
comparison of the
MED of routes from
each AS
bestroute compare-med
Optional
Not enabled by default
Enable the
comparison of the
MED of routes from
confederation
peers
bestroute med-confederation
Optional
Not enabled by default

HP A5500 SI Switch Series Specifications

General

Brand	HP
Model	A5500 SI Switch Series
Category	Switch
Language	English