HP A5500 SI Switch Series User Manual

314
To do… Use the command… Remarks
Configure the startup query
interval
startup-query-interval interval
Optional
By default, the startup query
interval is 1/4 of the “MLD query
interval”.
Configure the startup query count startup-query-count value
Optional
By default, the startup query count
is set to the MLD querier’s
robustness variable.
Configure the MLD query interval timer query interval
Optional
125 seconds by default.
Configure the maximum response
delay for MLD general query
messages
max-response-time interval
Optional
10 seconds by default
Configure the MLD last listener
query interval
last-listener-query-interval interval
Optional
1 second by default
Configure the MLD other querier
present interval
timer other-querier-present
interval
Optional
By default, the other querier
present interval is determined by
the formula: Other querier present
interval (in seconds) = [ MLD
query interval ] × [ MLD querier’s
robustness variable ] + [
maximum response delay for MLD
general query ] /2.
Configuring MLD query and response parameters on an interface
Follow these steps to configure MLD query and response parameters on an interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view
interface interface-type interface-
number
—
Configure the MLD querier’s
robustness variable
mld robust-count robust-value
Optional
2 times by default
Configure the startup query
interval
mld startup-query-interval interval
Optional
By default, the startup query
interval is 1/4 of the “MLD query
interval”.
Configure the startup query count mld startup-query-count value
Optional
By default, the startup query count
is the same as the robustness
variable.
Configure the MLD query interval mld timer query interval
Optional
125 seconds by default.

HP A5500 SI Switch Series Specifications

General

Brand	HP
Model	A5500 SI Switch Series
Category	Switch
Language	English