HP b2600 Technical Reference

116 Chapter4
Boot Console Handler
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output uses the memory command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for a workstation, first follow the directions
in the section “Accessing the Boot Console Handler” found in this chapter. Once you are in
the Boot Console Handler’s Main Menu, type the following:
Main Menu: Enter command > information [Enter]
This places you in the Information Menu. From here, type the following:
Information Menu: Enter command > memory [Enter]
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. The following sample shows the memory information when memory
DIMMs are properly installed and configured.
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size Status
---- ------ -------------
0 1GB Active
1 1GB Active
2 1GB Active
3 1GB Active
TOTAL MEMORY = 4096MB

HP b2600 Specifications

General

Brand	HP
Model	b2600
Category	Desktop
Language	English