To Next Page

To Previous Page

Chapter 4 117

Boot Console Handler

Displaying the Status of the I/O Slots

The IO command lets you identify all built-in I/O devices and optional I/O devices installed

in the option slots. It is available in the Information Menu.

To use the IO command from the Information Menu of the Boot Console Handler, type the

following:

Information Menu: Enter command > io [Enter]

Information about the built-in and optional I/O devices is displayed. For example:

I/O MODULE INFORMATION

IODC IODC

Path Decimal Type Location HVER SVER Vers Dep

---- ------- ---- -------- ---- ---- ---- ---

LAN 10/0/12/0 Ethernet built-in 0060 a200 0x02 0x00

IDE 10/0/14/0 IDE built-in 0060 a300 0x00 0x00

SUPERIO MISC 10/0/14/0 Bridge Device built-in

SERIAL_1 10/0/14/1/1 RS232 port built-in 0060 8c00 0x01 0x00

SERIAL_2 10/0/14/1/2 RS232 port built-in 0060 8c00 0x01 0x00

PARALLEL 10/0/14/1/3 Parallel Port built-in

USB 10/0/14/2 USB built-in 0060 a900 0x95 0x00

SCSI 10/0/15/0 SCSI built-in 0060 a300 0x00 0x00

FWSCSI 10/0/15/1 SCSI built-in 0060 a300 0x00 0x00

GRAPHICS(2) 10/4/2/0 HPA4982B slot 2 0070 8500 0x01 0x00

Main Menu: Enter command >

HP b2600 Technical Reference

Other manuals for HP b2600