To Next Page

To Previous Page

Chapter 1 13

Product Information

Hardware System Overview

To help you gain a better understanding of the HP B Class workstation, Table 1-1. provides

the workstation’s hardware system features.

Table 1-1. HP B2600 Hardware System Features

Workstation Feature Description

Processor A PA8600 microprocessor with an operating frequency

of 500MHz. This processor has a 0.5 MB instruction

cache and a 1.0MB data cache.

Monitors PC compatible monitors

Optional Graphics Supported graphics devices:

•HPVISUALIZE-fx5

•HPVISUALIZE-fxe rev. b

Main Memory Four memory slots (cards can be mixed):

• 256MB DIMMs

• 512MB DIMMs

• 1GB DIMMs

Internal Storage Devices Two Low-Voltage Differential (LVD) SCSI hard disk

drive and one optional ATAPI CD drive.

Standard Network 10/100 Base T LAN connector

Standard I/O Connectors Standard workstation I/O ports:

• Universal Serial Bus (USB) connectors, two

• Serial ports 1 and 2 connectors

• Parallel connector

• LAN connector

PCI slots

1. Its is recommended that you install the optional audio card in slot one of the PCI cage,

and your graphics card in slot three of the PCI cage.

Slot 1: 32 Bit, 5.0V, 33MHz (optional audio card)

Slot 2: 32 Bit, 5.0V, 33MHz

Slot 3: 64 Bit, 5.0V, 33MHz (graphics card)

Slot 4: 64 Bit, 5.0V, 33MHz

Remote Power-on Allows you to turn on your workstation from a remote

system.

HP b2600 Technical Reference

Other manuals for HP b2600