18 Chapter1
Product Information
Your Workstation’s Rear Panel Connectors
Power Cord Connector
Plug the workstation’s power cord into the power cord connector to provide AC power to
the system. For information regarding the DC power supply, see Appendix E in this
document.
Parallel Connector
This 25-pin parallel connector allows you to connect printers and disk drives that require a
parallel connector. This connector complies with the IEEE 1284 standard.
Network Connector
Your workstation has a built-in 10/100 BaseT network connection. Your workstation will
automatically select the correct network setting.
Audio Connectors (optional)
Your workstation does not provide for audio input and output capabilities. If you require
these capabilities, please contact your local HP Sales Representative. If you decide to
purchase the recommended optional audio card, read the chapter “Remove/Install System
Components” in this manual for installation instructions.
To Next Page
Loading...
Need help?
General