HP C8088B Administrator's Guide

ENWW TCP/IP Configuration 101
Using the Printer Control Panel
When supported by the printer, HP Jetdirect internal print servers
provide a configuration menu that can be accessed from the printer’s
control panel. Using this menu, you can enable or disable network
protocols and set basic network parameters. For HP Jetdirect
wireless print servers, you can also set basic wireless network
connection parameters. For a summary of the available menu items,
see Appendix C
.
Note For instructions on using the control panel for your
printer, refer to your printer documentation.
When accessing the HP Jetdirect menu from the printer’s control
panel, you can set the following TCP/IP network configuration
parameters:
● IP host name
● DHCP lease behavior (release or renew)
● IP address of the print server
● Subnet mask
● Default gateway address
● Syslog server address
● Idle timeout period
If you need to configure more TCP/IP parameters than allowed by
control panel configuration, use an alternate configuration tool
(such as Telnet or the embedded Web server) as described in this
chapter.
If the HP Jetdirect print server is configured to receive its TCP/IP
configuration from the printer control panel, the configuration is
saved on the print server when powered off/on.

HP C8088B Specifications

General

Brand	HP
Model	C8088B
Category	Printer Accessories
Language	English