ENWW HP Software Solutions Summary 35
7. To exit, select Quit from the File menu.
Notify everyone on your network of the new name for your printer
so they can select the printer in the Chooser.
Selecting a Zone
The HP LaserJet Utility allows you to select a preferred zone for
your printer on a Phase 2 EtherTalk network. Instead of your
printer remaining on the default zone, which is set by the router,
this utility lets you select the zone on which your printer appears.
The zones on which your printer can reside are limited by your
network configuration. The HP LaserJet Utility only enables
you to select a zone that is already configured for your
network.
Zones are groups of computers, printers, and other AppleTalk
devices. They can be grouped by physical location (for example,
Zone A may contain all the printers on the network in building A).
They may also be grouped logically (for example, all printers used
in the finance department).
1. Select the Settings icon from the scrolling icon list. The Please
Select a Setting: dialog box appears.
2. Select Printer Zone in the list and click Edit. The Select a
Zone dialog box appears.
3. Select your preferred network zone from the Select a Zone: list
and click Set Zone.
4. To exit, select Quit from the File menu.
Notify everyone on your network of the new zone for your printer
so they can select the printer in the Chooser.
Selecting Your Printer
1. Select the Chooser from the Apple menu.
2. Select the printer icon for use with your printer. If the
appropriate printer icon does not appear in the Chooser, or you
are not sure which icon to select for your printer, see “Installing
the Printer Software” in this chapter.
To Next Page
Loading...
Need help?
General
