HP ntegrity iLO 2 MP User Manual

Target: map1/dnsendpt1
The dnsendpt1 target represents the iLO 2 MP DNS client.
Table 6-45 shows dnsendpt1 target properties.
Table 6-45 dnsendpt1 Properties
Access and ValuesDescriptionProperty Name
Read only
The following are valid values:
Enabled: The iLO 2 MP DNS client is
enabled.
Disabled: The iLO 2 MP DNS client is
disabled.
Represents the state of iLO 2 MP
DNS.
EnabledState
Read-only
iLO 2 MP current host name.
Represents the host name currently
assigned to the iLO 2 MP.
Hostname
Read-only
Set to DNS.
Textual description of this protocol
endpoint.
OtherTypeDescription
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
Target: map1/enetport1/lanendpt1/ipendpt1/gateway1
The gateway1 target represents the gateway server.
Table 6-46 shows gateway1 target properties.
Table 6-46 gateway1 Properties
Access and ValuesDescriptionProperty Name
Read/write
The value of the property must be expressed
in dotted decimal notation.
Represents the IP address of the gateway
server.
AccessInfo
Read-only
Set to default gateway.
Represents access context (description)
of this access point.
AccessContext
Target: map1/dnsserver1, map1/dnsserver2, map1/dnsserver3
The dnsserver1, dnsserver2, and dnsserver3 targets represent the iLO 2 MP’s primary,
secondary, and tertiary DNS servers respectively.
Table 6-47 shows dnsserver1, dnsserver2, and dnsserver3 target properties
Table 6-47 dnsserver1, dnsserver2, dnsserver3 Properties
Access and ValuesDescriptionProperty Name
Read/write
The value of the property must be expressed
in dotted decimal notation.
Represents the IP address of the DNS
server.
AccessInfo
Read-only
Set to DNS server.
Represents access context (description)
of this access point.
AccessContext
Verbs
show Displays information.
help Displays context-sensitive help.
140 Using iLO 2 MP

HP ntegrity iLO 2 MP Specifications

General

Brand	HP
Model	ntegrity iLO 2 MP
Category	Server
Language	English