Setup Checklist
Use the checklist in Table 3-1 to help set up iLO 2 MP.
Table 3-1 Setup Checklist
XActionStep
Standard
1. Determine the access method to select and connect
cables.
2. Determine the LAN configuration method and assign
an IP address if necessary.
Prepare1
Choose a method to configure the LAN for iLO 2 MP
access:
• DHCP with DNS
• ARP-Ping
• Console serial port (RS-232)
Configure the iLO 2 MP LAN2
Log in to the iLO 2 MP from a supported web browser or
command line using the default user name and password.
Log in to the iLO 2 MP3
Change the default user name and password on the
administrator account to your predefined selections.
Change default user name and
password
4
Set up the user accounts if you are using the local accounts
feature.
Set up user accounts5
Set up the security access settings.Set up security access6
Access the host console using your method of choice.Access the host console7
Advanced
Activate advanced features by entering your HP Integrity
Advanced Pack license key.
Activate Advanced Pack features8
34 Setting Up and Connecting the Console
To Next Page
Loading...
Need help?
General