l Upon locating a broken or disfigured rivet on an installed TPM/TCM, administrators
should consider the system compromised and take appropriate measures to ensure the
integrity of the system data.
5.14.1 Installing a TPM/TCM
Step 1 Wear an ESD wrist strap. For details, see 12 Preventing Electrostatic Discharge.
Step 2 Power off the server. For details, see 3.2 Powering Off the Server.
Step 3 Remove the power cables. For details, see 3.7 Removing Cables from a PSU.
Step 4 Remove the server. For details, see 3.3 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 3.4 Removing the Chassis Cover.
Step 6 Take a spare TPM/TCM out of its ESD bag.
Step 7 Determine the port for installing the TPM/TCM. See Figure 5-55.
Figure 5-55 TPM/TCM port
Step 8 Insert the TPM/TCM vertically downwards into the TPM/TCM port on the mainboard. See
(1) in Figure 5-56.
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 164
To Next Page
Loading...
Need help?
General